View previous topic :: View next topic |
Author |
Message |
Ugly_Bird
Joined: 04 Nov 2008 Posts: 335
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
dhmark
Joined: 04 Sep 2007 Posts: 376
|
Posted: Wed Dec 08, 2021 10:25 am Post subject: |
|
|
Seems too thin and weak to retain anything substantial. If it was looped around the safety line of the base, it would keep the rig attached if the pin sheared off or the adapter accidentally released the pin, until that line breaks. I'm only guessing what it does. But it would not be easy to use, have to hook it up each use. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
joethewindsufa
![](images/avatars/contrib/97426152855c4981f76612.jpg)
Joined: 10 Oct 2010 Posts: 1190 Location: Montréal
|
Posted: Wed Dec 08, 2021 8:08 pm Post subject: |
|
|
i was gonna make my usual nonsense comments
but when i looked at images of this converter, they ALL had it
the Unifiber video shows the string which just looks loose ?!? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Ugly_Bird
Joined: 04 Nov 2008 Posts: 335
|
Posted: Wed Dec 08, 2021 8:34 pm Post subject: |
|
|
joethewindsufa wrote: | i was gonna make my usual nonsense comments
but when i looked at images of this converter, they ALL had it
the Unifiber video shows the string which just looks loose ?!? |
Yes, it is loose. It does absolutely nothing. More over it doesn't stay in those grooves at the bottom and slides between the moving surfaces (between the bottom of this adapter and the top of the mast base . Meaning, that it will be rubbed and ground between those.
I contacted Epic regarding this line. Didn't hear from them yet.
Andrei. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
rswabsin
Joined: 14 May 2000 Posts: 444 Location: New Jersey
|
Posted: Thu Dec 09, 2021 7:59 am Post subject: |
|
|
Maybe it's meant to tie off somehow to the either US mast base or the Uni so the adapter is not accidentally lost during the disconnect process. I'm thinking its intended to stay with either the mast base or the Uni when in use. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Ugly_Bird
Joined: 04 Nov 2008 Posts: 335
|
Posted: Thu Dec 09, 2021 10:32 am Post subject: |
|
|
rswabsin wrote: | Maybe it's meant to tie off somehow to the either US mast base or the Uni so the adapter is not accidentally lost during the disconnect process. I'm thinking its intended to stay with either the mast base or the Uni when in use. |
I do not really see how this could potentially happen. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
joethewindsufa
![](images/avatars/contrib/97426152855c4981f76612.jpg)
Joined: 10 Oct 2010 Posts: 1190 Location: Montréal
|
Posted: Fri Dec 10, 2021 10:14 am Post subject: |
|
|
i actually NEVER saw this before and the adapter makes the migration from US cup to Euro pin so much less painful - in terms of $$$
thanks man |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
swchandler
Joined: 08 Nov 1993 Posts: 10588
|
Posted: Fri Dec 10, 2021 2:20 pm Post subject: |
|
|
A number of years ago I bought a similar component that claimed to convert a Euro-pin connection to the 2-pin configuration. The first time I tried to use it, I found that it didn't work correctly, and as a result, it was something that was undependable and utterly useless.
Looking back, I think that it's best to have the right original products, even if it means having two different component systems. That said, I personally think that the Euro-pin configuration is the best overall design. It is far less subject to wear-and-tear and potential failure. I've found that the 2-pin design universal gets worn and wobbly with a years use, and I can't tell you how many 2-pin spring clips that have failed on me, potentially leaving you with a separated rig far offshore. Also, the pins wear the holes in the mast extension making it less dependable over the long term. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
joethewindsufa
![](images/avatars/contrib/97426152855c4981f76612.jpg)
Joined: 10 Oct 2010 Posts: 1190 Location: Montréal
|
Posted: Fri Dec 10, 2021 4:31 pm Post subject: |
|
|
agree with swchandler and the adapter is not available anywhere |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Ugly_Bird
Joined: 04 Nov 2008 Posts: 335
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|