myiW Current Conditions and Forecasts Community Forums Buy and Sell Services
 
Hi guest · myAccount · Log in
 SearchSearch   ProfileProfile   Log in to check your private messagesLog in to check your private messages   RegisterRegister 
Taken: Bar and Lines from Helm of Sun Valley (Updated)

 
Post new topic   Reply to topic    iWindsurf Community Forum Index -> Lost and Found
View previous topic :: View next topic  
Author Message
bajabill13



Joined: 12 Apr 2007
Posts: 11

PostPosted: Wed Jul 18, 2007 12:51 pm    Post subject: Taken: Bar and Lines from Helm of Sun Valley (Updated) Reply with quote

My kiteboarding bar was taken from Helm of Sun Valley property sometime between July 13 -17. It was attached to my pink and black 9.0 m Waroo, which had been rescued by John at Helm and was outside drying. The bar is CUSTOM and easily identifiable. I have photos of a similar type bar to help identify the components. If you have seen it or know of its whereabouts please contact me. If you took it, please return it to John at Helm, NO QUESTIONS ASKED. It was not a discarded bar although it might have looked like one.

The bar is a medium length NAISH. It has a red in the handle on the left and blue on the right. The chicken-loop assembly is Slingshot Camcleat Racing. There is a unique adjustable stopper between the bar and the pulley assembly which looks like a rubber cork-like piece with two holes drilled through it and a stub at the end of the stopper that faces the rider between the holes. There is a small pulley assembly attaching the power/depower line to the front line attachment point. The back lines were red and blue; the front lines yellow. The lines are around 23-25 meters long. At the end of the bar are elastic loops to pull down over the lines when the bar is wrapped up. The floatation devices over the back lines were blue and home made. They look kluged.

A photo of a comparable bar is attached. In the photo the bar is a Slingshot, not a Naish, short and different color. The chicken-loop assembly, stopper, floatation devices and pulley are identical. My pulley was attached to a different front line attachment assembly than in the photo: mine did not rotate; and my bar did not have a 2-1 pulley system on the back lines: it is straight 1-1.

Again, please help me recover this or return it if you took it.

Bill Sullivan
503-319-0937



IM002089.JPG
 Description:
Photo of similar bar (read narrative for differences)
 Filesize:  528.53 KB
 Viewed:  5008 Time(s)

IM002089.JPG


Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    iWindsurf Community Forum Index -> Lost and Found All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum

myiW | Weather | Community | Membership | Support | Log in
like us on facebook
© Copyright 1999-2007 WeatherFlow, Inc Contact Us Ad Marketplace

Powered by phpBB © 2001, 2005 phpBB Group