View previous topic :: View next topic |
Author |
Message |
gregnw44
Joined: 23 Jul 2008 Posts: 783 Location: Seattle, Wa
|
Posted: Fri Apr 20, 2018 8:21 am Post subject: |
|
|
Seattle's own - Bruce Lee!!
And yeah, I remember the pic of your kit on the dock - CarbOne and Slingshot. And I commented then, about your "protective handle" stuck to the nose!
Awesome... and well done
I might just have to buy a Powerplate some day and try that myself - Foiling Kona's... Lightning's... Equipe's... and all, haha! _________________ Greg
Longboarding since '81
Shortboarding since '84 |
|
Back to top |
|
|
dllee
Joined: 03 Jul 2009 Posts: 5330 Location: East Bay
|
Posted: Fri Apr 20, 2018 11:38 am Post subject: |
|
|
The Naish foil plate does not align with the Power Plate holes so I drilled my own. Seems all others do, but no Naish. |
|
Back to top |
|
|
grantmac017
Joined: 04 Aug 2016 Posts: 946
|
Posted: Fri Apr 20, 2018 1:08 pm Post subject: |
|
|
gregnw44 wrote: | Seattle's own - Bruce Lee!!
And yeah, I remember the pic of your kit on the dock - CarbOne and Slingshot. And I commented then, about your "protective handle" stuck to the nose!
Awesome... and well done
I might just have to buy a Powerplate some day and try that myself - Foiling Kona's... Lightning's... Equipe's... and all, haha! |
I don’t think a standard longboard finbox placement would permit foiling. The Kona is somewhat unique afterall. |
|
Back to top |
|
|
davenunn
Joined: 13 Sep 2005 Posts: 33
|
Posted: Mon Apr 23, 2018 2:25 pm Post subject: |
|
|
Update on the PowerPlate
1/ Now available in Deep Tuttle as well. See image below of all 3 fin-box types you can get.
2/ We have sold over 200 now and responses have been strong about ease of use,& durability of both the PowerPlate & the boards they are being used on.
3/ If you have a Naish foil or any other which have a different hole pattern we recommend drilling 2 additional holes to match the PowerPlate.
I don't follow this thread regularly so if you have any other questions just email us at windance@windance.com
Dave
[img][/img][/b] |
|
Back to top |
|
|
brand_adam
Joined: 01 Dec 2015 Posts: 25
|
Posted: Mon Jun 18, 2018 2:58 pm Post subject: |
|
|
I just wanted to post an update because it doesn't seem like there's too much info on these things online. I had my chance to try the Tuttle PowerPlate on my 122L Starboard Go over the weekend. My first two sessions were sub-planing and tuning the footstraps. I learned to start with them full forwards and inboard then go from there, I did the opposite and wasted lots of time. The third session I had it dialled with the Windance Foil Works foil and it was absolute magic. I've used a kite line leash attached to some webbing and bolted to one of my rear footstrap holes as Dave suggests in his video, it wasn't at all noticable and didn't get in my way when riding. I spent close to an hour on the foil and the board is holding up perfectly fine. I'll continue to watch it over the coming weeks. I am pretty excited about getting out on this setup again soon. |
|
Back to top |
|
|
ittiandro
Joined: 22 Nov 2009 Posts: 294
|
Posted: Mon Feb 11, 2019 9:20 pm Post subject: |
|
|
bred2shred wrote: | Two hundred bucks for a fin base mounted to an aluminum plate with a few holes drilled in it ....
I would be concerned about the moment (torque) being applied to the fin box with the foil being installed so far in front of the box. It is definitely not something most boards are designed for.
sm |
1. Can the hydrofoil fit directly into the board's finbox ( Power box) without using the $ 200 separate plate attachment? It would be cheaper and perhaps provide sufficient resistance to stress forces at least at low speeds.. Wouldn't it?
I seem to recall that originally this was the way hydrofoils were fitted to the original power box of the board...
ON a previous board I had, the fin was fitted to the fin box with a bolt screwed from the top through the board's deck .
I thought that this would prevent the hydrofoil or the finbox from being ripped off, without having to use an additional plate.
2.If a separate plate is absolutely necessary, is there sufficient thickness in the hull to safely bolt the plate through it?
I am not familiar with the inner anatomy of the board, but I always thought that the outer hard layer of the hull is relatively thin and after a few mm the inner core would be essentially soft foam, not allowing sufficient grip for the bolt.
Perhaps I am wrong. Can anybody comment on this?
Thanks
Ittiandro |
|
Back to top |
|
|
dllee
Joined: 03 Jul 2009 Posts: 5330 Location: East Bay
|
Posted: Mon Feb 11, 2019 10:47 pm Post subject: |
|
|
Fin head is bolted into board.
PP allows centering of the front foil between your feet. It is worth the price. |
|
Back to top |
|
|
brand_adam
Joined: 01 Dec 2015 Posts: 25
|
Posted: Tue Feb 12, 2019 2:53 pm Post subject: |
|
|
dllee wrote: | Fin head is bolted into board.
PP allows centering of the front foil between your feet. It is worth the price. |
Yup I couldn't agree more, I'm still very pleased with mine, I've got about 120 miles of foiling on it and it's been problem free. |
|
Back to top |
|
|
ittiandro
Joined: 22 Nov 2009 Posts: 294
|
Posted: Sat Feb 16, 2019 12:30 pm Post subject: |
|
|
dllee wrote: | Fin head is bolted into board.
PP allows centering of the front foil between your feet. It is worth the price. |
I haven't physically seen this contraption from close and how it works, yet.
By referring to the photo details above, could you please explain:
1. Is the fin head the mounting plate itself?
2. If so, what do you mean by saying that it is bolted to the board?
a. that the raised extrusion of the plate fits into the fin box housing and is bolted to it , or
b. that the plate itself is bolted to the bottom hull?
In the latter case, my question was if there is enough thickness in the bottom hull to drill holes into it to bolt the plate.
Thanks
Ittiandro |
|
Back to top |
|
|
grantmac017
Joined: 04 Aug 2016 Posts: 946
|
Posted: Sat Feb 16, 2019 3:11 pm Post subject: |
|
|
ittiandro wrote: | bred2shred wrote: | Two hundred bucks for a fin base mounted to an aluminum plate with a few holes drilled in it ....
I would be concerned about the moment (torque) being applied to the fin box with the foil being installed so far in front of the box. It is definitely not something most boards are designed for.
sm |
1. Can the hydrofoil fit directly into the board's finbox ( Power box) without using the $ 200 separate plate attachment? It would be cheaper and perhaps provide sufficient resistance to stress forces at least at low speeds.. Wouldn't it?
I seem to recall that originally this was the way hydrofoils were fitted to the original power box of the board...
ON a previous board I had, the fin was fitted to the fin box with a bolt screwed from the top through the board's deck .
I thought that this would prevent the hydrofoil or the finbox from being ripped off, without having to use an additional plate.
2.If a separate plate is absolutely necessary, is there sufficient thickness in the hull to safely bolt the plate through it?
I am not familiar with the inner anatomy of the board, but I always thought that the outer hard layer of the hull is relatively thin and after a few mm the inner core would be essentially soft foam, not allowing sufficient grip for the bolt.
Perhaps I am wrong. Can anybody comment on this?
Thanks
Ittiandro |
No, and no. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You can attach files in this forum You can download files in this forum
|
|
|