View previous topic :: View next topic |
Author |
Message |
fox
![](images/avatars/contrib/97475641946471fb20687f.jpg)
Joined: 09 Sep 1997 Posts: 133 Location: Pine Point, Maine
|
Posted: Tue Nov 20, 2018 1:57 pm Post subject: |
|
|
They can go in light snow, and a picture of a Woodie for the archives. It has an ash stringer that gives the deck a positive arch until loaded and has good flex.
Description: |
|
Filesize: |
528.49 KB |
Viewed: |
34236 Time(s) |
![IMG_0214.JPG](files/img_0214_653.jpg)
|
Description: |
|
Filesize: |
327.78 KB |
Viewed: |
34236 Time(s) |
![Ice jibe 2.jpg](files/ice_jibe_2_113.jpg)
|
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
systemslib
Joined: 11 Sep 2016 Posts: 37
|
Posted: Thu Nov 22, 2018 8:31 am Post subject: |
|
|
There are a few hardcore ice sailors in Maine, but the setup for proper conditions is not common as the ice almost always ends up with snow very quickly. But there have been late falls/early winter with dry cold conditions and the boaters appear, usually for a 2-3 day window after rain/refreeze. Many drive hundreds of miles for the conditions. It would not seem a sport with much guaranteed sailing time unless willing to travel at moments notice?
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
atlas.wave55
Joined: 24 Aug 2016 Posts: 111
|
Posted: Thu Nov 22, 2018 7:55 pm Post subject: |
|
|
Has anyone sailed a windskier 380CS?? Can't find any vids or other reviews of it. There's one near me for sale. Would the performance of it work only on ice? It looks like it would not need clear ice as much as the freeskate and could go in a bit of snow. You can adjust the angle of the skis. The board is aluminum so would be heavy enough to keep going through lulls. Not so much acceleration I would presume. Would it Have a hard time turning or going up or down wind.
This is what it looks like
Description: |
|
Filesize: |
419.4 KB |
Viewed: |
34129 Time(s) |
![20181122_195300.png](files/20181122_195300_584.png)
|
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
fox
![](images/avatars/contrib/97475641946471fb20687f.jpg)
Joined: 09 Sep 1997 Posts: 133 Location: Pine Point, Maine
|
Posted: Fri Nov 23, 2018 8:46 am Post subject: |
|
|
systemslib wrote: | There are a few hardcore ice sailors in Maine, but the setup for proper conditions is not common as the ice almost always ends up with snow very quickly. |
Ice boats need a lot more room and pristine conditions.
The ponds near the coast tend to get less snow and it gets blown off. A good rain goes a long way to clear things up as well. Add to that the larger lakes freeze later in the winter and avoid early snow accumulations.
It all depends on the winter, but there are years good ice sailing is very common.
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
gschuel1
Joined: 04 Apr 2005 Posts: 56 Location: Narragansett, RI
|
Posted: Thu Nov 29, 2018 1:22 pm Post subject: |
|
|
atlas.wave55 wrote: | Has anyone sailed a windskier 380CS?? Can't find any vids or other reviews of it. There's one near me for sale. Would the performance of it work only on ice? It looks like it would not need clear ice as much as the freeskate and could go in a bit of snow. You can adjust the angle of the skis. The board is aluminum so would be heavy enough to keep going through lulls. Not so much acceleration I would presume. Would it Have a hard time turning or going up or down wind.
This is what it looks like |
I have a windskier 380CS. You want to put long skis on it if possible. Jumping skis are ideal. The 380CS works both on clear ice as well as snow covered ice up to 6 inches deep, something that iceboards can't do. I installed small blades to the back of the skis to minimize spinout. If you don't do this you will skid upwind every time you sheet in the sail. I will send more details and pics later. I recommend you jump on this as these boards are extremely rare. They were imported from England of all places around 1984. I paid $200 for mine but it didn't come with skis or footstraps which I installed. I wouldn't pay more than $400 though, especially if the skis are less than 180cm long (you'll want to get longer ones).
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
gschuel1
Joined: 04 Apr 2005 Posts: 56 Location: Narragansett, RI
|
Posted: Thu Nov 29, 2018 1:28 pm Post subject: |
|
|
The place for info all things relating to ice board sailing is the "Iceboard WindSurfing" group on Facebook. This group has members both in the USA and Europe (Holland, Sweden, Norway, Latvia) and much info on board construction, race results, and sailing technique. You will need to get permission to join but we accept anyone!
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
atlas.wave55
Joined: 24 Aug 2016 Posts: 111
|
Posted: Thu Nov 29, 2018 5:29 pm Post subject: |
|
|
gschuel1 wrote: | atlas.wave55 wrote: | Has anyone sailed a windskier 380CS?? Can't find any vids or other reviews of it. There's one near me for sale. Would the performance of it work only on ice? It looks like it would not need clear ice as much as the freeskate and could go in a bit of snow. You can adjust the angle of the skis. The board is aluminum so would be heavy enough to keep going through lulls. Not so much acceleration I would presume. Would it Have a hard time turning or going up or down wind.
This is what it looks like |
I have a windskier 380CS. You want to put long skis on it if possible. Jumping skis are ideal. The 380CS works both on clear ice as well as snow covered ice up to 6 inches deep, something that iceboards can't do. I installed small blades to the back of the skis to minimize spinout. If you don't do this you will skid upwind every time you sheet in the sail. I will send more details and pics later. I recommend you jump on this as these boards are extremely rare. They were imported from England of all places around 1984. I paid $200 for mine but it didn't come with skis or footstraps which I installed. I wouldn't pay more than $400 though, especially if the skis are less than 180cm long (you'll want to get longer ones). |
I did not even know if this thing worked very well so have not pick one up so....thanks for the quick review I can get one with skis for around $50. They don't look that long though. But I guess I can switch skis for long ones. What is a good length for skis? Interested to see what you did with yours. The angle of the skis can adjust right?
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
atlas.wave55
Joined: 24 Aug 2016 Posts: 111
|
Posted: Thu Nov 29, 2018 5:46 pm Post subject: |
|
|
[quote="gschuel1"]The place for info all things relating to ice board sailing is the "Iceboard WindSurfing" group on Facebook. This group has members both in the USA and Europe (Holland, Sweden, Norway, Latvia) and much info on board construction, race results, and sailing technique. You will need to get permission to join but we accept anyone![/quote
Did not know windsurfing in the winter was this popular. Lots of sick ice sleds in that group. Don't think I would use any of my newer race sails though wouldn't monofilm be pritty brittle in low temps. Puting your ass through a pannel at 50 knots probably doesn't help either
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
gorky
Joined: 07 Aug 2003 Posts: 23
|
Posted: Thu Nov 29, 2018 7:32 pm Post subject: |
|
|
That ice windsurfing video from Maine is really great, those jibing tacks or whatever they are, are about the coolest maneuver in windsurfing.
Do people still do this? Those guys made it look pretty amazing.
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
gschuel1
Joined: 04 Apr 2005 Posts: 56 Location: Narragansett, RI
|
Posted: Fri Nov 30, 2018 10:35 am Post subject: |
|
|
atlas.wave55 wrote: | gschuel1 wrote: | atlas.wave55 wrote: | Has anyone sailed a windskier 380CS?? Can't find any vids or other reviews of it. There's one near me for sale. Would the performance of it work only on ice? It looks like it would not need clear ice as much as the freeskate and could go in a bit of snow. You can adjust the angle of the skis. The board is aluminum so would be heavy enough to keep going through lulls. Not so much acceleration I would presume. Would it Have a hard time turning or going up or down wind.
This is what it looks like |
I have a windskier 380CS. You want to put long skis on it if possible. Jumping skis are ideal. The 380CS works both on clear ice as well as snow covered ice up to 6 inches deep, something that iceboards can't do. I installed small blades to the back of the skis to minimize spinout. If you don't do this you will skid upwind every time you sheet in the sail. I will send more details and pics later. I recommend you jump on this as these boards are extremely rare. They were imported from England of all places around 1984. I paid $200 for mine but it didn't come with skis or footstraps which I installed. I wouldn't pay more than $400 though, especially if the skis are less than 180cm long (you'll want to get longer ones). |
I did not even know if this thing worked very well so have not pick one up so....thanks for the quick review I can get one with skis for around $50. They don't look that long though. But I guess I can switch skis for long ones. What is a good length for skis? Interested to see what you did with yours. The angle of the skis can adjust right? |
$50 is a great price! You should jump on this, even if the skis are short. You can pick up old/used long skis later. Attached is a picture of the small blades that I attached to the back of the skis to minimize spin-out. As I said skis should be 180cm or longer. I have 220cm jumping skis on my 380CS. Also you need to apply wax to the skis on a regular basis, just like any other kind of skiing. The picture was taken just after I applied hot wax to the skis but before I buufed it out (just like waxing your car). Yes the ski angle is adjustable but you can set them to 45 degrees and forget it. Angle is necessary so the ski edges "bite" into the ice or snow. You won't use/need the full ski surface area unless in deeper snow.
Description: |
|
Filesize: |
1.33 MB |
Viewed: |
33740 Time(s) |
![IMG_20150131_094759_255.jpg](files/img_20150131_094759_255_165.jpg)
|
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You can attach files in this forum You can download files in this forum
|
|
|