myiW Current Conditions and Forecasts Community Forums Buy and Sell Services
 
Hi guest · myAccount · Log in
 SearchSearch   ProfileProfile   Log in to check your private messagesLog in to check your private messages   RegisterRegister 
New Viento sensor
Goto page 1, 2  Next
 
Post new topic   Reply to topic    iWindsurf Community Forum Index -> Northwest USA & Canada
View previous topic :: View next topic  
Author Message
sailworksman



Joined: 26 Jul 2000
Posts: 46

PostPosted: Fri Oct 20, 2017 12:33 pm    Post subject: New Viento sensor Reply with quote

A big thank you to iWindsurf/Weatherflow for the new Viento wind sensor. West wind building/dying in the corridor? Now you can check. This will be awesome for east wind foil sessions too.

Nice work guys! Razz
Back to top
View user's profile Send private message Visit poster's website
AirTym



Joined: 31 May 2003
Posts: 20
Location: Gorge Central

PostPosted: Fri Oct 20, 2017 3:22 pm    Post subject: Reply with quote

...

Last edited by AirTym on Thu Oct 26, 2017 10:34 am; edited 1 time in total
Back to top
View user's profile Send private message
windfind



Joined: 18 Mar 1997
Posts: 1324

PostPosted: Sat Oct 21, 2017 11:28 am    Post subject: Reply with quote

Hi Gang!

We all have to thank Stuart of the Sensor Install crew for installing this new sensor on the Coast Guard Nav. Aid as well as Matt and Ben who did the endless paper work with the Dept. of Defense to get permission for this installation.

And thanks for Guy who has camped at Viento for years and often sails there in the morning before heading to the Hatch. He was the one who met with us at Viento and confirmed that the sensor Nav. Aid location would be useful. Basically the sensor will read low compared to the wind mid river but once you figure out the correction factors it should be useful.

Below are images of the sensor and its location.

How to use the Viento sensor:

http://blog.weatherflow.com/west-coast-wind-blog-i-dont-sail-at-viento-so-why-should-i-care-about-the-new-viento-sensor/

1. Most days the winds build at Viento before reaching the Hatch, Swell, Event Site launch sites. So the Viento sensor gives you an early hint for planning your day.

2. Likewise a mid day fade at Viento often gives a hint of an upcoming fade at the Hatch and Swell.

3. Often on light wind 4.7 - 5.2 days there is not much swell and people do not make the drive to Hatch and Swell. On these small swell days the wind is concentrated just in the Hatch and Swell zone. But other times on light wind days there is great swell at Hatch and Swell IF Viento is also blowing. Even mild wind can make good swell if the entire corridor is blowing making for a long fetch.

4. And for those who are here only for a short time... they can now catch the early morning winds at Viento before the Hatch and Swell zone becomes reliable.

5. Lastly this sensor will help forecasting since it is an additional pressure reading in the corridor.

At present you can access the Viento sensor at:

http://wx.iwindsurf.com/map#45.695,-121.623,13,1

We will soon have this sensor on the Classic IW map.

Mike Godsey
iwindsurf.com/ikitesurf.com
Weatheflow.com



Viento.jpg
 Description:
 Filesize:  259.54 KB
 Viewed:  1483 Time(s)

Viento.jpg




Last edited by windfind on Thu Nov 02, 2017 7:40 pm; edited 1 time in total
Back to top
View user's profile Send private message
AirTym



Joined: 31 May 2003
Posts: 20
Location: Gorge Central

PostPosted: Sat Oct 21, 2017 2:12 pm    Post subject: Reply with quote

...

Last edited by AirTym on Thu Oct 26, 2017 10:35 am; edited 1 time in total
Back to top
View user's profile Send private message
windfind



Joined: 18 Mar 1997
Posts: 1324

PostPosted: Sat Oct 21, 2017 5:36 pm    Post subject: Reply with quote

Hi AirTym,

The Roosevelt sensor did not belong to us. We put it on our sites as a Public Domain sensor as a service to our customers. Unfortunately the owners of the sensor did not repair it when it failed. So far we have not found a property owner next to the river at Roos who will host one of our sensors. So we moved the Arlington sensor to a new location right next to the water and closer to the water surface. That it is a bit more useful for the Roos launch.

I also miss the Roos sensor but frankly there are very few sites where we have 2 sensors just across the river from each other.

Incidentally we have over 700 of our own weather stations just in the USA. At any given time about 99% of them are operational. That still means that at any given time about 5-10 of then are down somewhere in the USA due to lightning, corrosion, boat collisions with Nav. Aids, fallen trees, fishing or kite line etc. So we have East coast and West coast repair crews flying around the USA repairing sensors or installing new sensors like the Viento. Unless there is an unusual circumstance like our needing to charter a boat or gaining access to a site we usually have sensors back in operation in a couple weeks or sooner.

Here is a video I shot over one especially busy weekend to give customers an idea of what sensor installation and repair entails.

https://windnotes.smugmug.com/1-Videos-WindsurfKite/1-Gorge-Videos/i-CN8Fm92/A

Mike Godsey
iwindsurf.com/ikitesurf.com
Weatheflow.com


Last edited by windfind on Sun Oct 22, 2017 4:35 pm; edited 1 time in total
Back to top
View user's profile Send private message
AirTym



Joined: 31 May 2003
Posts: 20
Location: Gorge Central

PostPosted: Sat Oct 21, 2017 6:29 pm    Post subject: Reply with quote

...

Last edited by AirTym on Tue Oct 31, 2017 9:33 am; edited 2 times in total
Back to top
View user's profile Send private message
H2OJoe



Joined: 20 Aug 2002
Posts: 66

PostPosted: Sun Oct 22, 2017 1:46 pm    Post subject: Reply with quote

Thanks to you and your team for all the great work and effort!
Back to top
View user's profile Send private message
AlexM



Joined: 03 Jun 2005
Posts: 25
Location: East Central Florida

PostPosted: Sun Oct 22, 2017 4:36 pm    Post subject: Reply with quote

The new sensor shows Viento cranking in the upper 20's today, so I showed up, only to discover that the park is closed. How the heck was the sensor installed given that there's no open access road?
Back to top
View user's profile Send private message
windfind



Joined: 18 Mar 1997
Posts: 1324

PostPosted: Sun Oct 22, 2017 5:34 pm    Post subject: Reply with quote

Hi Alex,

Road access would not help since the Coast Guard Nav. Aid. where the Viento sensor is located is out in the river. The sensor crew uses boats to access the Rooster Rock, Dougs, The Wall and 3 Mile Canyon sensors since they are all out in the river.

That is why those sensors sometimes take longer to repair when they are down. We have to obtain a boat and wait for a day with no wind or swell. Plus it takes a larger repair crew.

We are lucky here in the Gorge since Stuart lives here and can do repairs quickly unless he is out of state repairing sensors in Texas or Maui or drill down by double clicking repeatedly on this map link to see where Stuart might be:

http://wx.iwindsurf.com/map#39.51,-99.534,5,1

Mike Godsey
iwindsurf.com/ikitesurf.com
Weatheflow.com



USAsensors.jpg
 Description:
 Filesize:  406.68 KB
 Viewed:  1339 Time(s)

USAsensors.jpg


Back to top
View user's profile Send private message
AirTym



Joined: 31 May 2003
Posts: 20
Location: Gorge Central

PostPosted: Wed Oct 25, 2017 1:01 pm    Post subject: Reply with quote

...

Last edited by AirTym on Tue Oct 31, 2017 9:29 am; edited 2 times in total
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    iWindsurf Community Forum Index -> Northwest USA & Canada All times are GMT - 5 Hours
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum

myiW | Weather | Community | Membership | Support | Log in
like us on facebook
© Copyright 1999-2007 WeatherFlow, Inc Contact Us Ad Marketplace

Powered by phpBB © 2001, 2005 phpBB Group