View previous topic :: View next topic |
Author |
Message |
manuel
Joined: 08 Oct 2007 Posts: 1158
|
Posted: Thu Mar 27, 2014 2:36 pm Post subject: Does low boom equates to wrong sail design |
|
|
If we use the lower section of the boom opening of a sail, does it mean that the sail isn't designed for our riding style?
One a similar note, for the same surface, wouldn't a tall person benefit from a different design compare to a shorter person?
|
|
Back to top |
|
|
isobars
Joined: 12 Dec 1999 Posts: 20935
|
Posted: Thu Mar 27, 2014 3:21 pm Post subject: |
|
|
My guess is that it means only that we want our booms lower than the average buyer, not that the sail won't work just fine. (Today's trend to very long harness lines might make lower booms highly impractical for its followers.) OTOH, sailors who ignore trends and use what works best for their own ergonomics and sailing style get to choose their own boom heights. My long-successful sail designer, a NASA aerodynamics consultant and contractor, assured me that my lower-than-stock custom cutouts (to assist rigging by putting my booms closer to the center of the cutout) will not degrade performance.
Certainly sailor height (and boom height, and arm length, and sailing style, and venue, and preferences, and sail tuning, and much more) will affect a sail's responses, but whether those changes are for better or worse depends on many factors. Like everything else from fin screws to tophauls, almost every deviation from "the norm" has pros and cons. If it didn't, all wave or slalom or beginner gear would be alike within its niche.
How boring would THAT be?
OTOH, I can't imagine a short person wanting to tune a Hucker expressly for jumping (high center of effort) and put it on a sinker unless high altitude is his only criterion. Sailworks has even cautioned buyers about the extra vertical lift jump-tuning exerts on the rider, which with that combination tends to load up the board nose and require full time extra effort from the rider. Taller (and heavier) riders can tame that mix more easily, so there's one example of matching rider ergonomics at least to sail tuning (more downhaul lowers the COE to more normal levels), if not basic design. |
|
Back to top |
|
|
U2U2U2
Joined: 06 Jul 2001 Posts: 5467 Location: Shipsterns Bluff, Tasmania. Colorado
|
Posted: Thu Mar 27, 2014 4:01 pm Post subject: |
|
|
Hot Sails Maui for the one I know does design sails for smaller and shorter humans.
Why Would YOU place the boom in a lower section of the cutout ?
Your question , I dont really understand.
I suppose a sail maker who could afford to make sizes within sizes could do this, Salaried Riders , those that perform at the top level may make use of such, regular people dont think they would benefit from a custom fitted sail. _________________ K4 fins
4Boards....May the fours be with you
http://www.k4fins.com/fins.html
http://4boards.co.uk/ |
|
Back to top |
|
|
dllee
Joined: 03 Jul 2009 Posts: 5329 Location: East Bay
|
Posted: Thu Mar 27, 2014 4:59 pm Post subject: |
|
|
I thought, the boom cutout was supposed to represent the sail designers entire range of possible boom heights given the style of sail for the board used (mast track position), and style of the given discipline.
Slalom sailiors can have really high booms, and some have really low booms, so a big range is needed.
Most freestyle sailors I know use pretty high booms, to hang off during spin tricks.
Most wave sailors seem to use low booms.
But nothing is universal, as personal preference play the biggest role. |
|
Back to top |
|
|
nw30
Joined: 21 Dec 2008 Posts: 6485 Location: The eye of the universe, Cen. Cal. coast
|
Posted: Thu Mar 27, 2014 7:08 pm Post subject: |
|
|
To the OP question, only if there was only one place to connect the booms to the mast, a cut out about 6" long or less. Nobody makes those that aren't custom, it would be lame. |
|
Back to top |
|
|
manuel
Joined: 08 Oct 2007 Posts: 1158
|
Posted: Thu Mar 27, 2014 10:42 pm Post subject: |
|
|
I guess the question could be valid the other way too. If it's too high then is the rider looking to achieve something outside the designed range too?
The thing is the optimum setting would be the middle of the cutout, right? So by moving it away from there we steer away from the optimum setting.
I'm curious whether manufacturers move the cutout depending on sail design. For example, a slalom sail may have a higher cutout than a wave sail, no?
Or even more specifically is a power wave sail cutout higher than a regular wave sail? |
|
Back to top |
|
|
PeconicPuffin
Joined: 07 Jun 2004 Posts: 1830
|
Posted: Fri Mar 28, 2014 7:11 am Post subject: |
|
|
manuel wrote: | If it's too high then is the rider looking to achieve something outside the designed range too?
The thing is the optimum setting would be the middle of the cutout, right? So by moving it away from there we steer away from the optimum setting. |
The designed range is the entire cutout. That's why it's there...to accommodate the full range of sailors and sailing styles and abilities that the sail was intended for.
Unless you're an advanced sailor with specific goals, you are generally best off with the boom just below shoulder level. At the clavicles. If you are course racing take it a few inches higher. On the waves take it 2" down. Otherwise lock it at the clavicles and worry about other things. Like:
1. You need more downhaul.
2. You need to sheet in more. _________________ Michael
http://www.peconicpuffin.com |
|
Back to top |
|
|
keycocker
Joined: 10 Jul 2005 Posts: 3598
|
Posted: Fri Mar 28, 2014 1:42 pm Post subject: |
|
|
My expert wife who is 4'11" sometimes has to cut out the sail opening lower because she favors handling over speed. Strictly wave sailor.
Hot sails don't require this.
We sold several lines of sails at our shop that needed to have the opening cut lower for almost everyone. |
|
Back to top |
|
|
Sailboarder
Joined: 10 Apr 2011 Posts: 656
|
Posted: Fri Mar 28, 2014 4:51 pm Post subject: |
|
|
manuel wrote: |
The thing is the optimum setting would be the middle of the cutout, right? So by moving it away from there we steer away from the optimum setting.
? |
The boom attachement position has no effect on the sail itself.
It has a definite influence on the ride however since it changes the angles with which you apply your gravity on the boom to hold the sail. |
|
Back to top |
|
|
westender
Joined: 02 Aug 2007 Posts: 1288 Location: Portland / Gorge
|
Posted: Fri Mar 28, 2014 7:04 pm Post subject: |
|
|
When you use a Z boom, the cut out could be too low. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You can attach files in this forum You can download files in this forum
|
|
|