Might buy a used Ezzy Infiinity w/ Cams, need advice!

Thurston · Joined: 08 Jul 2013 Posts: 101

Thanks for the encouragement and advice Doug. I think I made a good buy and can't wait to try things out.

Brian_S · Joined: 11 Jun 2005 Posts: 249 Location: SE Michigan

Thurston,
If you have any problems or questions, just contact them directly. Tim Ortlieb or David Ezzy will get back to you pretty quickly.

konajoe · Joined: 28 Feb 2010 Posts: 517

Sounds like you got a great deal!

I'd suggest doing all of the measurements for the cams and cam pockets on a day before you plan on using the sail. It takes a little time for the initial set up, and you want to get it right.

If there isn't a detailed rigging and tuning guide in the sail bag, go to the Ezzy website, print it, and take it with you. It takes about 2 minutes longer to rig the Infinity than it does to rig a camless sail IF you follow the instructions. If you don't follow the instructions, it can be a struggle.

I have a small sample set to work with, but the 3 folks I've seen use these sails without the cam didn't like them. 2 of them sold their sails for dirt cheap to folks who put the cams in, and loved them.

U2U2U2 · Posted: Wed May 28, 2014 1:24 pm Post subject:

i posed an additional reply , that got lost in cyberspace.
yes ezzy will offer support . the 7.5 that i had worked best for me with no cams, on a sdm powerex .

if you use the cams, the mast should be one that is a similar to ezzys, constant curve, if not then you can expect rotational problems.

you can write and receive a reply from david within a day or less.

david@ezzy.com

i hope this works out for you.

Thurston · Joined: 08 Jul 2013 Posts: 101

I have a 30% carbon Fiberspar Quicktip 460/25. I'm having trouble finding whether or not it's a constant curve mast.

U2U2U2 · Posted: Wed May 28, 2014 3:48 pm Post subject:

dllee · Joined: 03 Jul 2009 Posts: 5329 Location: East Bay

All masts are constant curve since 1995 or so.
Some have softer tops, some have softer bottoms, Gaastra and No Limitz, but all are CC.
Flex top died in the mid 90's.

U2U2U2 · Posted: Wed May 28, 2014 6:07 pm Post subject:

what ?

http://www.unifiber.net/2013/mast-selector

mark · Joined: 10 Apr 2000 Posts: 181

http://www.peterman.dk/masts-all-imcs01.htm

I think your mast is a Fiberspar Reflex 3200. With a IMCS bend characteristic of 12.8 the mast would fall into the constant curve category.

U2U2U2 · Posted: Wed May 28, 2014 8:37 pm Post subject: