myiW Current Conditions and Forecasts Community Forums Buy and Sell Services
 
Hi guest · myAccount · Log in
 SearchSearch   ProfileProfile   Log in to check your private messagesLog in to check your private messages   RegisterRegister 
New fanitac coffee table.Hats off to Boardsports!!!
Goto page 1, 2, 3  Next
 
Post new topic   Reply to topic    iWindsurf Community Forum Index -> Southwest USA, Hawaii, Mexico
View previous topic :: View next topic  
Author Message
Georges



Joined: 10 Apr 2000
Posts: 249

PostPosted: Mon May 13, 2013 7:15 pm    Post subject: New fanitac coffee table.Hats off to Boardsports!!! Reply with quote

After a great 6 years on a JP freestyle wave it was time to say good by to the old girl and move on,my choice was a fanitac freewave 105. After only 2 times
On the water a friend discovered a major delamanaction in front of the fin box.
I was quick to bring it back to the shop where it was purchased less than 2 weeks ago.
I am now without a board waiting to see if the warranty gods will shine on me.
Keep you posted on how it all turns out. Gman.
Quote:


UPDATE !!
Boardsports at coyote point will be repairing the defective board and returning
It to me as a loaner untill my new 105 arrives!!! It should also be noted they are doing this with or without the distributors or Fanatics warranty approval.

Hats off to the crew at Boardsports for thinking of there customers satisfaction
First.
Please remember them when making your next purchase they are a class
Act and deserve the full support of the watersports community. Gman

Cool Cool


Last edited by Georges on Thu May 23, 2013 8:40 pm; edited 1 time in total
Back to top
View user's profile Send private message
LUCARO



Joined: 07 Dec 1997
Posts: 661

PostPosted: Tue May 14, 2013 12:09 am    Post subject: Reply with quote

sux!
Back to top
View user's profile Send private message
cptn_picard



Joined: 01 Apr 2010
Posts: 41

PostPosted: Tue May 14, 2013 9:47 am    Post subject: Reply with quote

Funny, I just bought a 2013 Biax glass construction Fanatic Skate and it is the most fragile board I have every ridden. My JP Freestyle Pro is exceedingly more durable (which is scary). Makes me wonder if Fanatic is having some serious quality problems.
Back to top
View user's profile Send private message
Rube



Joined: 21 Jun 2000
Posts: 82

PostPosted: Tue May 14, 2013 12:43 pm    Post subject: Reply with quote

Ahoy Captain,

Interesting you say that. I have the exact same board, and it does seem a little more prone to scratches in the paint than previous boards I have had - wondering if this is because it has more different colours of paint than other (all white) boards, and so it seems to show up more. I did get a small ding on the tail, but still watertight. I've been jumping it a lot, and so far no soft spots (cross fingers) - what are you seeing?
Back to top
View user's profile Send private message
victor



Joined: 03 Aug 1998
Posts: 581

PostPosted: Tue May 14, 2013 1:40 pm    Post subject: Reply with quote

i ruined a relatively new board. i had it inside my car with the nose very close to a heater vent. cold spring day at crissy so I cranked up the heater on the ride home.

next session I felt a weird thumping. flipped the board over and the bottom forward of the mast track had delammed. there was some blistering on the rail right where the heater vent hit it. the repair was going to cost about half the price of a new board.

note to self: always take the vent screw out after a session.
Back to top
View user's profile Send private message
tomg



Joined: 10 Apr 2000
Posts: 294

PostPosted: Tue May 14, 2013 3:12 pm    Post subject: Reply with quote

So those vent screws are to be used?

you'd think they could stick a one way valve on there to allow hot air out and keep water from going in.
Back to top
View user's profile Send private message
carl



Joined: 25 Feb 1997
Posts: 2674
Location: SF bay area

PostPosted: Tue May 14, 2013 3:49 pm    Post subject: Reply with quote

tomg wrote:
So those vent screws are to be used?

you'd think they could stick a one way valve on there to allow hot air out and keep water from going in.


That valve would be expensive. It has to withstand constant vibration in chop so it can't be a gravity valve. Goretex is too fragile and unreliable.
Plus it is very small as valves go, so it is probably not an already manufactured item. I would think it has to be custom designed. Most WS
businesses are small operations and running lean.


Last edited by carl on Tue May 14, 2013 3:52 pm; edited 1 time in total
Back to top
View user's profile Send private message
dllee



Joined: 03 Jul 2009
Posts: 5328
Location: East Bay

PostPosted: Tue May 14, 2013 3:50 pm    Post subject: Reply with quote

Plenty of Gortex one way valves on the market.
Most work really well, for a few months.
Back to top
View user's profile Send private message
damel



Joined: 15 Jul 2007
Posts: 247

PostPosted: Tue May 14, 2013 4:29 pm    Post subject: Reply with quote

My Fanatic SUP board has a Gortex vent. I was scratching my head trying to find the vent screw before heading up to tahoe and posted a question on Fanatic's website and they told me that there are no vent screws on the SUP boards anymore.

Sucks about the board de-laminating. The shop should be able to open the board and determine if there was an error when the board was manufactured. Do you live around SF where there are big hills and altitude changes. I can hear air enter my board through the vent when I head to 3rd ave from where I work on top of a hill in San Mateo.

Just as important as opening the vent screw you should never tighten it too hard. Just enough to squeeze the rubber gasket shut. This should allow for air to slowly escape slowly and prevent water from coming in.

_________________
_____/)_____
http://east-of-maui.blogspot.com/
Back to top
View user's profile Send private message Visit poster's website
carl



Joined: 25 Feb 1997
Posts: 2674
Location: SF bay area

PostPosted: Tue May 14, 2013 5:10 pm    Post subject: Reply with quote

damel wrote:
My Fanatic SUP board has a Gortex vent. I was scratching my head trying to find the vent screw before heading up to tahoe and posted a question on Fanatic's website and they told me that there are no vent screws on the SUP boards anymore.

Sucks about the board de-laminating. The shop should be able to open the board and determine if there was an error when the board was manufactured. Do you live around SF where there are big hills and altitude changes. I can hear air enter my board through the vent when I head to 3rd ave from where I work on top of a hill in San Mateo.

Just as important as opening the vent screw you should never tighten it too hard. Just enough to squeeze the rubber gasket shut. This should allow for air to slowly escape slowly and prevent water from coming in.


That's interesting to know about Goretex vents in SUPs.

As for tighting the screw too much, how do you know how much is too much? I think it's probably better not to trust the integrety of the board to how much torque is on that 25 cent O-ring.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    iWindsurf Community Forum Index -> Southwest USA, Hawaii, Mexico All times are GMT - 5 Hours
Goto page 1, 2, 3  Next
Page 1 of 3

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum

myiW | Weather | Community | Membership | Support | Log in
like us on facebook
© Copyright 1999-2007 WeatherFlow, Inc Contact Us Ad Marketplace

Powered by phpBB © 2001, 2005 phpBB Group